The Racing & High Performance Division of CSF Inc. strives to build and engineer the most advanced, efficient, and reliable cooling systems in the world. CSF manufacturers a wide variety of sophisticated cooling systems with more than 117 different applications ranging from high performance all-aluminium direct-fit replacement radiators, to complete custom applications for race cars, power sports, off-road, marine, and industrial uses.
The CSF High-Performance Charge-Air Cooler Manifold upgrades charge-air cooling on compatible BMW models with the Gen. 1 B58 engine. Its billet aluminium construction combines a larger liquid-to-air intercooler core with provision for supplementary port injection, additional sensors and individual-runner injection systems. Manufactured in Australia by Custom Plenum Creations, the manifold is designed to improve heat management and support demanding performance builds while retaining access to the engine oil filter.
Individual 1/8 NPT ports on each cylinder runner for supplementary injection
Integrated sensor pad with three 1/8 NPT ports
Rear water-plate ports for temperature monitoring or air bleeding
Slotted mounting tabs to simplify alignment during installation
Recessed design maintains access to the spin-off oil filter
Installation hardware and illustrated instructions included
Raw billet aluminium, thermal black Cerakote or custom finish options
2-year limited manufacturer warranty
COOLING DESIGN
The larger water-cooled core helps control intake air temperatures during sustained performance use. An internal air divider distributes airflow along the core, while the counterbalanced design around the oil-filter recess helps maintain airflow to the rear cylinders. Lower pressure drop reduces restriction through the core.
The included KIYLEX spacer forms a thermal barrier between the cylinder head and manifold. This helps reduce conductive heat transfer into the aluminium assembly and manage heat soak between runs or during extended idling.
PERFORMANCE TESTING CONTEXT
CSF developed the CSF8300 using the core design and features of its Gen. 2 CSF8200 manifold. The published VF Engineering and MotoIQ comparison involved more than 50 dyno runs testing that Gen. 2 design, including repeated pulls approximately 30 seconds apart in warm ambient conditions.
Those tests reported faster intake-temperature recovery and around 30°F (approximately 17°C) lower intake temperatures. On the specified approximately 400whp Stage 2 test vehicle, one comparison showed approximately 26whp and 11 lb-ft additional wheel torque. These results relate to the Gen. 2 development vehicle and are not direct CSF8300 test results or guaranteed gains on a Gen. 1 installation.
PORT INJECTION & SENSOR CONNECTIONS
The included AN-8 top-feed fuel rail supports supplementary port injection through individual injector positions on each runner. These positions are supplied plugged for installations retaining the original fuelling arrangement. The rail includes feed/return provision and Radium Engineering plug fittings. Injectors, fuel lines and control equipment must be specified separately for the complete fuel system.
7mm fuel-rail apertures for compatible injectors
Six anodised injector hats included for suitable short-height injectors
Individual 1/8 NPT runner ports for nitrous or methanol injection
Three 1/8 NPT sensor-pad ports for additional measurements or vacuum connections
INSTALLATION & INCLUDED EQUIPMENT
The Gen. 1 kit includes installation hardware and illustrated instructions covering 32 different parts. Slotted mounting tabs help align the manifold and throttle-body mounting points. The kit supports the original engine cover or a compatible cover using the original mounting arrangement.
A clockable -6 ORB 90-degree swivel overflow fitting allows flexible return-line routing. Approximately 1 metre (40 inches) of overflow hose and a factory-style quick connector are supplied. Rear water-plate ports assist air bleeding and can also be used for temperature monitoring. Complete installation and coolant bleeding using the supplied CSF8300 instructions and the applicable BMW procedure.
FINISH OPTIONS
Choose the finish using the available product option. Contact us before ordering a custom finish to confirm the colour, coating and lead time.
CSF8300: Raw billet aluminium
CSF8300B: Thermal Black Heat Dispersion Cerakote
CSF8300C: Custom finish, subject to the agreed specification
These manifolds cannot be anodised; coatings applied outside CSF may affect the manufacturer warranty
MODEL APPLICATIONS & FITMENT
For compatible BMW models equipped with the Gen. 1 B58 engine and the correct original manifold configuration. CSF lists the following applications; production dates and engine changes vary by market.
F20/F21 M140i
F22/F23 M240i
F30/F31/F34 340i
F32/F33/F36 440i
Early G30/G31 540i
Early G32 640i Gran Turismo
Early G11/G12 740i / 740Li
Early G01/G02 X3 / X4 M40i
Not suitable for later Gen. 2 or Gen. 3 B58 applications, including G29 Z4 and A90/A91 GR Supra. Refer to the BMW OEM part number below and confirm the engine generation and original manifold compatibility before ordering.
OEM PART NUMBER REFERENCE
BMW: 11618603913
OPERATING LIMIT & WARRANTY
CSF pressure-tests each CSF8300 manifold at 60–70 PSI for 2–3 minutes during quality control. This test pressure is not an operating rating: the manifold is not designed to operate above 60 PSI. Operation above that limit voids the CSF 2-year limited manufacturer warranty. Manufacturer warranty terms apply.
Models
1 Series
F20 (2012-2019):
M140i
2 Series
F22 / F23 (2014-2021):
M240i
3 Series
F30 / F31 / F34 (2012-2018):
340i
4 Series
F32 / F33 / F36 (2014-2020):
440i
5 Series
G30 / G31 (2017+):
540i
6 Series
G32 (2017+):
640i
7 Series
G11 / G12 (2016+):
740i / 740Li
X3 Series
G01 (2018+):
X3 M40i
X4 Series
G02 (2018+):
X4 M40i
Be the first to write a review
Thanks for submitting your review!
Please note, all reviews must be approved before they are published.
Items marked GREEN or 'In Stock' are currently in stock at SouthernBM. Most orders are shipped within 1-2 business days. ‘Click & Collect’ orders are usually ready within 1-2 hours during normal trading hours.
Available to Order
Items marked YELLOW or ‘Available To Order’ are not currently in stock at SouthernBM, and need to be ordered in from the supplier. Please note the expected delivery time before placing an order.
No Longer Available
Items marked RED or ‘No Longer Available’ have been discontinued and are no longer available to be ordered. Please contact us for an alternative.
All orders are dispatched from our Melbourne warehouse. Most orders are delivered within 1-3 business days Australia-wide after dispatch. The expected delivery time on all 'Available To Order' items is only an estimate and wait times may vary from those provided. Please contact us if you have any questions.
All items listed on our website are not available for in store pick up without prior purchase. Please use the ‘Click & Collect’ option at checkout and we will let you know as soon as your order is ready.
Make a booking
Thanks! We've received your request. We will be in touch within 1 business day to confirm your booking. If you do not see the email in this time, please check your JUNK/SPAM folder.
Preferred Date
Drop Off Time
Vehicle
Registration #
First Name
Last Name
Email Address
Keep me updated with news and exclusive offers
Phone
Referral Code (Optional)
If you've been given a referral code through one of our events, partners, or social media collaborators, please enter it here. This field is optional and is not required to complete your booking.
How can we help?
Send Request
By clicking the Send button, you acknowledge that this form is a request for service and not a confirmation.