Girodisc Front Replacement Rotor Ring Set, 360x30mm - E9x M3, E82 1M
Girodisc is a Braking Technology Company dedicated to developing the best quality high performance braking components and solutions. The company has been in business since 2003 and is guided under the direction of company Principal Martin Meade, who spent five years as an Engineer with Porsche Engineering Services, where he played a role in developing current Porsche technology.
GIRODISC 360x30mm REPLACEMENT FRONT ROTOR RINGS FOR THE BMW E9X M3 & E82 1M
The Girodisc 360x30mm D1-157 replacement rings fit the A1-157 two-piece front rotor set on the BMW E90 M3 Sedan, E92 M3 Coupé, E93 M3 Convertible and E82 1 Series M Coupé with factory 360mm front brakes. The kit supplies two slotted iron rings and new mounting hardware so you can reuse your serviceable Girodisc centre hats.
Sold and priced as a pair for the front axle. Girodisc part number D1-157.
FITMENT INFORMATION
Suitable for BMW E90 M3 Sedan, E92 M3 Coupé, E93 M3 Convertible and E82 1 Series M Coupé (1M) with the standard front brake package.
Requires the matching Girodisc A1-157 front rotor hats. Sold and priced as a pair of rings with new mounting hardware for both sides. Centre hats are sold separately as part of the complete rotor set.
OEM PART NUMBER REFERENCE — ORIGINAL VEHICLE DISCS
Left front — 34112283801
Right front — 34112283802
GIRODISC ROTOR CONSTRUCTION
Girodisc’s two-piece rotor design combines a high-carbon iron friction ring with a lightweight 6061-T6 aluminium centre hat. The brake pads act on the iron ring, while the hat mounts the rotor to the wheel hub. A floating connection between the two allows the ring to expand as it heats up under braking. When the ring reaches its wear limit, it can be replaced while retaining the serviceable centre hat.
INTERNAL COOLING
Each front ring has curved cooling vanes between its two braking surfaces. As the rotor turns, the vanes act as a centrifugal pump, drawing air in near the hub and directing it out through the outer edge. This airflow carries heat away from both faces of the ring during repeated hard braking.
FULLY FLOATING MOUNT
High-strength alloy steel drive pins connect the iron ring to the aluminium hat and carry the load under braking. The mounting system allows the ring to expand outwards as it heats up and to move slightly from side to side so it can centre itself between the pads. This controlled movement is what makes the rotor fully floating.
The drive pins are cadmium-plated for corrosion resistance. Spring clips and Belleville washers keep tension on the mounting hardware, helping control rattle when the brakes are cold while still allowing the ring to move as it comes up to temperature.
IMPORTANT QUESTIONS ANSWERED
What is required to install the replacement rings?
Retain the serviceable A1-157 Girodisc centre hats and fit the new hardware supplied with the D1-157 ring set. Follow Girodisc’s ring assembly instructions and check the assembled rotors for clearance before driving.
How does rotor weight affect the vehicle?
A brake rotor spins with the wheel and moves up and down with the suspension. Reducing its weight has two benefits. It takes less energy to change the rotor’s speed during acceleration and braking, and the suspension has less weight to control as the wheel follows bumps in the road. The weight difference depends on the original disc and the Girodisc application.
Why does Girodisc use a slotted braking surface?
As each slot passes beneath the brake pad, its edge helps refresh the pad surface and clear debris from the contact area. In wet conditions, the slots also help disperse water that can form a film between the pad and disc.
Why does Girodisc favour slotted discs for track use?
During track use, discs heat rapidly under braking and cool between braking zones. Repeated heating and cooling can cause cracks to form around drilled holes, particularly with high-friction race pads. A slotted disc provides edges that refresh the pad surface without drilling holes through the friction ring.
Does it matter which side a rotor is fitted to?
Yes. On a directional rotor, the internal cooling vanes determine which side of the vehicle it fits. When fitted correctly, the curved vanes draw air in near the hub and direct it out through the edge of the disc. Reversing the left and right rotors reduces that cooling airflow. Follow the side label on each Girodisc rotor during installation and remove it before bedding the brakes.
Do new rotors and pads need to be bedded in?
Yes. Bedding gradually brings the pads and discs up to temperature and allows their friction surfaces to mate evenly. Girodisc also recommends bedding the brakes when changing to a different pad compound. A change in friction material can otherwise contribute to judder, vibration or squeal.
For the 360mm Girodisc A1-157 front rotors, replace the rings when they reach the minimum thickness marked on the rotor, or sooner if a crack reaches the edge of a ring. For vehicles used on track, we recommend checking disc thickness before and after each event.
The matching D1-157 front replacement ring set allows you to renew both braking surfaces and reuse the aluminium centre hats if they remain serviceable. Fit the new mounting hardware supplied with the rings each time they are replaced.
Items marked GREEN or 'In Stock' are currently in stock at SouthernBM. Most orders are shipped within 1-2 business days. ‘Click & Collect’ orders are usually ready within 1-2 hours during normal trading hours.
Available to Order
Items marked YELLOW or ‘Available To Order’ are not currently in stock at SouthernBM, and need to be ordered in from the supplier. Please note the expected delivery time before placing an order.
No Longer Available
Items marked RED or ‘No Longer Available’ have been discontinued and are no longer available to be ordered. Please contact us for an alternative.
All orders are dispatched from our Melbourne warehouse. Most orders are delivered within 1-3 business days Australia-wide after dispatch. The expected delivery time on all 'Available To Order' items is only an estimate and wait times may vary from those provided. Please contact us if you have any questions.
All items listed on our website are not available for in store pick up without prior purchase. Please use the ‘Click & Collect’ option at checkout and we will let you know as soon as your order is ready.
Make a booking
Thanks! We've received your request. We will be in touch within 1 business day to confirm your booking. If you do not see the email in this time, please check your JUNK/SPAM folder.
Preferred Date
Drop Off Time
Vehicle
Registration #
First Name
Last Name
Email Address
Keep me updated with news and exclusive offers
Phone
Referral Code (Optional)
If you've been given a referral code through one of our events, partners, or social media collaborators, please enter it here. This field is optional and is not required to complete your booking.
How can we help?
Send Request
By clicking the Send button, you acknowledge that this form is a request for service and not a confirmation.