KW suspensions combines German engineering with decades of motorsport experience to produce world-leading suspension systems for road and track. From height adjustable spring kits and coilover suspensions to dedicated racing systems, KW offers an extensive range to suit different vehicles, driving styles and performance goals. Each application is carefully engineered and tested to deliver the handling characteristics and ride quality appropriate to its intended use. With ongoing investment in research and development, alongside close collaboration with racing teams worldwide, KW continues to bring advanced suspension technology to everyday drivers, performance enthusiasts and professional competitors.
Damping Adjustment: Rebound And Compression Adjustment
Material: Stainless Steel
Adjustment FA/RA: Thread/Thread
Approval: Part Approval (§19.3)
Front Axle Load: 1,071–1,170 kg*
Rear Axle Load: Up To 1,260 kg
Rebound Adjustment: 16 Clicks
Compression Adjustment: 16 Clicks
FITMENT & REQUIREMENTS
Suitable for all-wheel-drive BMW 3 Series G20 Sedan (330d xDrive, 330d xDrive Mild Hybrid, M340d xDrive Mild Hybrid, M340i xDrive, M340i xDrive Mild Hybrid); and 4 Series G22 Coupe (430d xDrive Mild Hybrid, 430i xDrive Mild Hybrid, M440d xDrive Mild Hybrid, M440i xDrive Mild Hybrid) models only. Refer to the model/variant list at the bottom of this page for full compatibility.
Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers).
Dampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.
35208200CZ / 35208200CZ-B: For vehicles without factory electronic damping (EDC).
35208200DA / 35208200DA-B: For vehicles with factory electronic damping (EDC). Electronic damping control must be deactivated. A deactivation kit is included.
WHAT'S INCLUDED
Set FA coilover struts, RA springs with height adjustment + dampers.
35208200DA / 35208200DA-B: EDC cancellation kit included.
* Marked specifications summarise the vehicle models and product variants covered by this listing. Exact lowering ranges and axle-load limits may differ by model or variant. Check the specifications for your vehicle before ordering or installation.
Images are for illustration purposes only. The appearance and components shown may vary for your vehicle.
Product Information
ABOUT KW VARIANT 3 (V3) LEVELING COILOVERS
KW V3 Leveling coilovers combine independently adjustable compression and rebound damping with a ride-height range focused on everyday ground clearance.
Part of KW’s Street Comfort range, they are developed for drivers who want improved handling and a composed ride while keeping the vehicle close to its original height. The spring and damper package prioritises comfort and usable suspension travel, with adjustment available to refine the setup.
EVERYDAY COMFORT WITH CONTROLLED HANDLING
The V3 Leveling’s development focuses on the roads encountered during daily driving, including uneven surfaces, road joints and speed humps.
Its suspension travel and spring calibration support a comfortable ride, while the dampers control body movement during braking, cornering and changes of direction.
This approach makes ground clearance and ride quality central to the suspension’s design.
INDEPENDENT COMPRESSION AND REBOUND ADJUSTMENT
V3 Leveling uses KW’s V3 multi-valve technology, with separate adjustment of low-speed compression and rebound damping.
Compression adjustment influences body support during braking, acceleration and cornering. Rebound adjustment controls how quickly the suspension extends after compression, allowing ride behaviour and body movement to be refined.
Factory-configured high-speed valves accommodate faster damper movements over sharp surface changes. This provides a balance between controlled handling and the ability to absorb uneven roads.
RIDE-HEIGHT ADJUSTMENT CLOSE TO STANDARD
The available height adjustment is designed around modest changes to the vehicle’s original ride height.
Depending on the application, the range may allow subtle lowering, retention of standard height or a small increase in height. The exact adjustment range is specific to the vehicle and kit.
Threaded adjusters allow the height to be set manually during suspension setup.
STAINLESS STEEL INOX-LINE CONSTRUCTION
KW’s inox-line stainless steel housings provide corrosion resistance for regular road use.
Combined with composite spring seats and trapezoidal threads, the height-adjustment components are designed to remain functional over time, allowing the setup to be revisited after installation.
KEY FEATURES
Developed for everyday comfort and controlled road handling.
Ride-height range focused on maintaining practical ground clearance.
Independently adjustable low-speed compression and rebound damping.
KW V3 multi-valve technology.
Vehicle-specific spring and damper calibration.
Suspension travel suited to the comfort-focused setup.
Manual ride-height adjustment within the specified range.
HOW V3 LEVELING COMPARES TO V2 COMFORT AND V3
KW V2 Comfort combines a comfort-focused spring and damper setup with adjustable lowering and rebound damping. Its compression damping is preset by KW.
KW V3 Leveling shares that emphasis on everyday ride quality, while adding independently adjustable compression damping and a height range developed around retaining practical ground clearance.
The standard KW V3 offers the same core compression and rebound adjustment functions as V3 Leveling, with a Street Performance setup and a lowering range focused on a more pronounced reduction in ride height.
V3 Leveling applies V3 damping technology to a different purpose: refining comfort and handling while keeping the vehicle closer to its original operating height.
Please refer to the Key Details section and model compatibility list for this kit’s height-adjustment range, suspension requirements and fitment restrictions.
Items marked GREEN or 'In Stock' are currently in stock at SouthernBM. Most orders are shipped within 1-2 business days. ‘Click & Collect’ orders are usually ready within 1-2 hours during normal trading hours.
Available to Order
Items marked YELLOW or ‘Available To Order’ are not currently in stock at SouthernBM, and need to be ordered in from the supplier. Please note the expected delivery time before placing an order.
No Longer Available
Items marked RED or ‘No Longer Available’ have been discontinued and are no longer available to be ordered. Please contact us for an alternative.
All orders are dispatched from our Melbourne warehouse. Most orders are delivered within 1-3 business days Australia-wide after dispatch. The expected delivery time on all 'Available To Order' items is only an estimate and wait times may vary from those provided. Please contact us if you have any questions.
All items listed on our website are not available for in store pick up without prior purchase. Please use the ‘Click & Collect’ option at checkout and we will let you know as soon as your order is ready.
Make a booking
Thanks! We've received your request. We will be in touch within 1 business day to confirm your booking. If you do not see the email in this time, please check your JUNK/SPAM folder.
Preferred Date
Drop Off Time
Vehicle
Registration #
First Name
Last Name
Email Address
Keep me updated with news and exclusive offers
Phone
Referral Code (Optional)
If you've been given a referral code through one of our events, partners, or social media collaborators, please enter it here. This field is optional and is not required to complete your booking.
How can we help?
Send Request
By clicking the Send button, you acknowledge that this form is a request for service and not a confirmation.
