Speed Engineering Front Brake Cooling Complete Set - G8x M2, M3, M4
Pure Engineering - Made in Germany. Speed Engineering thinks new in their ideas, developments, designs and products. Speed Engineering's standard is the extremely high demands in motorsport, which is reflected in every work step, whether in motorsport or off the race track.
$899.00
Product Information
Air Duct Inlet
In order to transport the air to the outlet of the brake ventilation, a suitable inlet is essential. The G8x M2/M3/M4 already has intake ducts in the front bumper ex works, but these end in the middle of the wheel housing. In order not to randomly swirl the air in the wheel housing, Speed Engineering have developed an extension of the air duct, which can be installed with minimal effort and connects the air to the outlet using a hose around the wheel. No fastening tool is required for assembly. It is exchanged with the original duct socket. The channel is based on the OEM channel and therefore uses exactly the same connection points and can therefore be retrofitted 100% without leaving any residue.
Air Duct Outlet
For many vehicles, such as the G8x M2/M3/M4, brake cooling is recommended even under medium-heavy loads, even off the race track. This not only improves braking performance, but also drastically reduces wear on the brake pads and discs.
The Speed Engineering anchor plate uses the channelling of airflow to the centre of the brake disc to use the turbine effect to cool the disc from the inside. In doing so, the disc is targeted at a defined angle so as not to suffer any wastage and to use the available air volume as efficiently as possible. Due to the light construction in combination with powdered aluminium, the anchor plate is sufficiently strong and at the same time light and insensitive. In addition, the bearings closest to the brake disc are shielded from the heat.
Important Information
The different models vary slightly in the wheel position, coupled with different chassis geometries and wheel and tyre combinations, it is impossible for all variants to be covered. In the worst case, the wheel could hit the ducting when the steering wheel is fully turned (which should only be the case when parking), which cannot damage the tyre. In this case we would ask you to do without the last ¼ of the steering turns.
The required brake hose diameter is 51mm (2m included).
The required brake hose diameter is 51mm (2m included).
Suitable for all G87 M2 Coupe, G80 M3 Sedan, G82 M4 Coupe and G83 M4 Convertible (Rear Wheel Drive and M xDrive) models.
Scope of delivery
- 1x Anchor Plate, Front Axle, Left
- 1x Anchor Plate, Front Axle, Right
- 1x Air Duct Inlet, Left
- 1x Air Duct Inlet, Right
- 2x Washer M4
- 2x Air Hose 51mm, 1m
- 4x Hose Clamp
Models
- 2 Series / G87 M2 (2022+) / M2
- 3 Series / G80 / G81 M3 (2021+) / M3
- 3 Series / G80 / G81 M3 (2021+) / M3 Competition
- 4 Series / G82 / G83 M4 (2021+) / M4
- 4 Series / G82 / G83 M4 (2021+) / M4 Competition
- 4 Series / G82 / G83 M4 (2021+) / M4 CSL
Be the first to write a review
Please note, all reviews must be approved before they are published.
You might also like…
The guys are great, definitely take your BMW there.
David Veeken
Google Review
I have used many mechanics over the years for the many different types of vehicles in our company fleet and southern BM is one of the very few workshops I can highly recommend. Andrew and his team are also really passionate about their work and it shows.
Archie Psallas
Google Review
Seriously great service and people. Honest and fair. Would happily recommend anyone to them.
Amir Pali
Facebook Review
My first dealing with Southern BM was a pleasant one. I had some springs and shocks installed and Sean was a delight to deal with. Knowledgeable, helpful and offered solutions when not everything went to plan. I would happily recommend them.
Errol Frank
Google Review
After 3 other BMW workshops couldn't fix the problem with my M3. SouthernBM sorted it. Excellent to deal with, great communication and customer service.
David Dean
Google Review
Company
Explore
Stay up to date
We respect your privacy − read our policy.
© 2024 SouthernBM. All Rights Reserved.
Stay up to date
We respect your privacy − read our policy.
Stock Availability
| In Stock | Items marked GREEN or 'In Stock' are currently in stock at SouthernBM. Most orders are shipped within 1-2 business days. ‘Click & Collect’ orders are usually ready within 1-2 hours during normal trading hours. |
| Available to Order | Items marked YELLOW or ‘Available To Order’ are not currently in stock at SouthernBM, and need to be ordered in from the supplier. Please note the expected delivery time before placing an order. |
| No Longer Available | Items marked RED or ‘No Longer Available’ have been discontinued and are no longer available to be ordered. Please contact us for an alternative. |
All orders are dispatched from our Melbourne warehouse. Most orders are delivered within 1-3 business days Australia-wide after dispatch. The expected delivery time on all 'Available To Order' items is only an estimate and wait times may vary from those provided. Please contact us if you have any questions.
All items listed on our website are not available for in store pick up without prior purchase. Please use the ‘Click & Collect’ option at checkout and we will let you know as soon as your order is ready.
All items listed on our website are not available for in store pick up without prior purchase. Please use the ‘Click & Collect’ option at checkout and we will let you know as soon as your order is ready.
Make a booking
By clicking the Send button, you acknowledge that this form is a request for service and not a confirmation.
