Air Duct Inlet
In order to transport the air to the outlet of the brake ventilation, a suitable inlet is essential. The E82 and E88 1 Series with M Sport Package already has intake ducts in the front bumper from factory, but these are in the middle of the wheel housing. In order not to randomly swirl the air in the wheel housing, Speed Engineering have developed a new duct, which is replaced 1 to 1 by the OEM duct and connected to the anchor plate by means of a hose connection.
Air Duct Outlet
The Speed Engineering anchor plate uses the channelling of airflow to the centre of the brake disc to use the turbine effect to cool the disc from the inside. In doing so, the disc is targeted at a defined angle so as not to suffer any wastage and to use the available air volume as efficiently as possible. Due to the light construction in combination with powdered aluminium, the anchor plate is sufficiently strong and at the same time light and insensitive.
Important Information
The different models vary slightly in the wheel position, coupled with different chassis geometries and wheel and tyre combinations, it is impossible for all variants to be covered. In the worst case, the wheel could hit the ducting when the steering wheel is fully turned (which should only be the case when parking), which cannot damage the tyre. In this case we would ask you to do without the last ¼ of the steering turns.
The required brake hose diameter is 51mm (2m included).
Suitable for all E82 1 Series Coupe and E88 1 Series Convertible (incl. 135i) models fitted with M Sport Package. Not for E82 1 Series M (1M) Coupe.
Scope of delivery
- 1x Anchor Plate, Front Axle, Left
- 1x Anchor Plate, Front Axle, Right
- 1x Air Duct Inlet, Left
- 1x Air Duct Inlet, Right
- 2x Air Hose 51mm, 1m
- 4x Hose Clamp
Models
- 1 Series / E82 / E88 (2007-2013) / 135i N54
- 1 Series / E82 / E88 (2007-2013) / 135i N55
- 1 Series / E82 / E88 (2007-2013) / 125i
- 1 Series / E82 / E88 (2007-2013) / 120i